Sticky Suggestion - Hiwatt FANE Models

The Holy Grail of Speakers, when powered by vintage Hylight Hiwatt amps!

Moderator: Mods

Sticky Suggestion - Hiwatt FANE Models

Postby JC103 on Thu Aug 06, 2009 9:53 pm

Hey does anyone want to post a sticky with the basic model numbers and production years for the Hylight era Fanes? I always forget whats what, thanks!
JC103
 
Posts: 148
Joined: Mon Dec 03, 2007 2:08 am

Re: Sticky Suggestion

Postby Dr.HIWATT on Thu Aug 06, 2009 10:09 pm

SE4121 - Speaker Enclosure 4x12 version 1
- 22w Fane drivers #122141, 14,000 gauss.
- 16ohm 150 watt rating.
- short lived as the 22w drivers could not handle the power of DR103's

SE4122 - Speaker Enclosure 4x12 version 2
- 50w Fane drivers #122142, 17,000 gauss
- 16ohm 150 watt rating

SE4123 - Speaker Enclosure 4x12 version 3
- 50w Fane drivers #122231, 14,000 gauss
- 16ohm 100 watt rating

This is good from 1969 through 1978. When I get the time I will copy the pages of the Fane ledger, but don't hold your breath!
User avatar
Dr.HIWATT
Site Admin
 
Posts: 1481
Joined: Wed Nov 14, 2007 9:51 pm
Location: HIWATT Valley

Re: Sticky Suggestion - Hiwatt FANE Models

Postby OldSchoolDave on Thu Aug 06, 2009 11:12 pm

Later Hylight Hiwatt FANE models include:

125114 and 125155.

Will post specs, if I can find any.

Dave

EDIT: Forgot the 122918 (cast frame from 1980).

P.S. Good idea JC103!
HIWATT amps - collect them all!
User avatar
OldSchoolDave
 
Posts: 1258
Joined: Wed Nov 14, 2007 10:24 pm
Location: Twin Cities, USA

Re: Sticky Suggestion - Hiwatt FANE Models

Postby JC103 on Fri Aug 07, 2009 4:08 pm

Thanks for post DR.H, you forgot one thing... to mention if the frames were cast or stamped.;)
JC103
 
Posts: 148
Joined: Mon Dec 03, 2007 2:08 am

Re: Sticky Suggestion - Hiwatt FANE Models

Postby Dr.HIWATT on Fri Aug 07, 2009 4:11 pm

The 122231 and 122142 could be either. it depends on the date. and there was no distinct transition date. I have steel frame 122231 from 02/74 and aluminum frame 122231 from 26/74.

122142 cast up to early 1974
User avatar
Dr.HIWATT
Site Admin
 
Posts: 1481
Joined: Wed Nov 14, 2007 9:51 pm
Location: HIWATT Valley

Re: Sticky Suggestion - Hiwatt FANE Models

Postby JC103 on Fri Aug 07, 2009 4:14 pm

:D
JC103
 
Posts: 148
Joined: Mon Dec 03, 2007 2:08 am

Re: Sticky Suggestion - Hiwatt FANE Models

Postby yabasta! on Thu Mar 11, 2010 5:03 am

why the difference in overall rating between the 4122 and the 4123 if both cabs have 50 watt fanes?

are they both more realistically 200 watt cabs?
yabasta!
 
Posts: 10
Joined: Tue Jun 30, 2009 6:01 am

Re: Sticky Suggestion - Hiwatt FANE Models

Postby Dr.HIWATT on Thu Mar 11, 2010 6:46 pm

They are HIWATT 100 watt cabs. Back in the day Marshall would rate their amps at maximum watts, where HIWATTs were rated at watts before clipping. So while on paper a 4x12 cab with 50 watt drivers wired series-parallel would have a 200 watt rating, it is really only recommended for 100w. of HIWATT power.

While both 122231 and 122142 are excellent for guitar,
the 122142 drivers are better for bass.
User avatar
Dr.HIWATT
Site Admin
 
Posts: 1481
Joined: Wed Nov 14, 2007 9:51 pm
Location: HIWATT Valley

Re: Sticky Suggestion - Hiwatt FANE Models

Postby Dr.HIWATT on Thu May 20, 2010 3:22 pm

updated to add:
122231 with stamped/pressed steel frames as early as the second week of 1974
125161 50 watts 16ohm.
used for approx. 6 months in early-mid 1978 replacing 122231 in rear loaded SE4123 cabs.
User avatar
Dr.HIWATT
Site Admin
 
Posts: 1481
Joined: Wed Nov 14, 2007 9:51 pm
Location: HIWATT Valley


Return to Vintage FANE Speakers

Who is online

Users browsing this forum: No registered users and 1 guest